| © copyright 2005-2006 |
| Diogen Lighting |
| all rights reserved |
| Diogen Lighting |
| all rights reserved |
why non-replaceable bulbs?
WHY NON-REPLACEABLE BULBS?
Our patented manufacturing process includes the injecting of plastic material over the connection of the L.E.D. and the copper wire. The husk or socket that normally has the bulb inserted into it on our set is actually a one-piece injection. This means that the L.E.D. cannot be removed from the socket and therefore no replacement L.E.D.s will ever be needed.
- L.E.D.s are polarity specific. If a bulb is removed and then turned around and reinserted, it will not work. If several bulbs have fallen out of the socket over time then it is almost impossible to determine which one is in backwards. In these cases, often the entire set will not light. OURS CANNOT BE REMOVED.
- L.E.D.s are power specific. Each color of L.E.D. requires a different amount of power in order to work at its highest efficiency. Most replaceable bulb sets are supplied with a red L.E.D. (which is the cheapest). If you replace a lost or defective Blue L.E.D. with a red replacement L.E.D., it will soon burn out because the socket for the Blue is wired with a much higher power than that for the red. If you were to place a Blue L.E.D. in a socket designed for a Red L.E.D. then it would hardly light. IN OUR SET, EVERY SOCKET IS SPECIFICALLY WIRED FOR THE COLOR OF L.E.D. THAT IS INSERTED AND PERMANENTLY AFFIXED SO THAT THE BEST PERFORMANCE IS GUARANTEED.
- Rust issues make the best case for a non-replaceable L.E.D. Because the leads of the L.E.D. and the copper wire of the cord are different materials, they are susceptible to rust. If any moisture is introduced into the environment of the bulb either in the form of condensation or actual water, it begins to rust. And, the rusting process is very fast. In these cases, the bulb will rust and literally fall out of the socket within only a few months. THE NON-REPLACEABLE L.E.D. IS COMPLETELY WATER TIGHT – NO MOISTURE CAN ENTER THE AREA OF THE CONNECTION AND THEREFORE NO RUST CAN OCCUR.
Our patented manufacturing process includes the injecting of plastic material over the connection of the L.E.D. and the copper wire. The husk or socket that normally has the bulb inserted into it on our set is actually a one-piece injection. This means that the L.E.D. cannot be removed from the socket and therefore no replacement L.E.D.s will ever be needed.
Nothing has greater impact than lighting. Lighting influences the appearance, tone and impression of every object and space. The nature of light shapes our vision. Lighting technology has come a long way since the invention of Edison’s light bulb. Diogen Lighting has the honor to present to you the next evolutionary step in L.E.D. technology.
Specializing in Patented L.E.D. technology - Diogen Lighting offers long-lasting, low-maintenance and energy-efficient solutions. Through direct partnership with factory facilities and state of the art product development, Diogen Lighting is the perfect partner for your lighting needs. L.E.D. technology provides no glass bulbs to break or filaments to burn out and requires less than 10% of the energy needs of the standard fixture equivalent. We provide a patented plug-in technology on our light strings… direct AC plug-in eliminating the need for DC conversion. This allows installers the ability to connect more than a half-mile of light, end to end, into one electrical outlet without the use of messy extension cords or expensive generators.
Our innovative retrofit products replace traditional incandescent light bulbs with L.E.D. technology without any modification to the light fixture. All our products are available in a variety of lens styles and an array of colors including: pure white, warm white, purple, pink, red, green, orange, yellow, blue and several patented color changing selections.
The “Light of the Future,” the Light Emitting Diode, is rapidly replacing incandescent lighting in both decorative and commercial applications. As L.E.D. technology continues to go through revolutionary advances, Diogen Lighting is dedicated to cutting-edge technology. Diogen Lighting is proud to present to the professional electrician and contract installer the technology of L.E.D. lighting with energy savings and code-conforming commercial grade products.
All of our products are available through factory direct in container quantities or domestically through our fast growing distributor base. Please contact us today to find a distributor near you or become a distributor and to begin experiencing the Diogen L.E.D. difference.
Specializing in Patented L.E.D. technology - Diogen Lighting offers long-lasting, low-maintenance and energy-efficient solutions. Through direct partnership with factory facilities and state of the art product development, Diogen Lighting is the perfect partner for your lighting needs. L.E.D. technology provides no glass bulbs to break or filaments to burn out and requires less than 10% of the energy needs of the standard fixture equivalent. We provide a patented plug-in technology on our light strings… direct AC plug-in eliminating the need for DC conversion. This allows installers the ability to connect more than a half-mile of light, end to end, into one electrical outlet without the use of messy extension cords or expensive generators.
Our innovative retrofit products replace traditional incandescent light bulbs with L.E.D. technology without any modification to the light fixture. All our products are available in a variety of lens styles and an array of colors including: pure white, warm white, purple, pink, red, green, orange, yellow, blue and several patented color changing selections.
The “Light of the Future,” the Light Emitting Diode, is rapidly replacing incandescent lighting in both decorative and commercial applications. As L.E.D. technology continues to go through revolutionary advances, Diogen Lighting is dedicated to cutting-edge technology. Diogen Lighting is proud to present to the professional electrician and contract installer the technology of L.E.D. lighting with energy savings and code-conforming commercial grade products.
All of our products are available through factory direct in container quantities or domestically through our fast growing distributor base. Please contact us today to find a distributor near you or become a distributor and to begin experiencing the Diogen L.E.D. difference.